Search
Side Banner Advantage12/3/2013 12:00 AM

International DT466E (Electronic) Engine Data Sheet

Engine Information
Cubic Inches
Liters
Number of Cylinders
Bore Size
Stroke
Years Produced
Engine Torque Specs
Rod Bearing Torque
Main Bearing Torque
Cylinder Head Torque
Exhaust Manifold Torque
Firing Order
Intake Valve Lash
Exhaust Valve Lash
Serial Prefix
469H
470H
466H
Serial Number Range to Piston
1822097
1824810C1 (16.7:1 CR)
1823930C1 (16.2:1 CR)

** Engines from serial 1194039 and up, the bore was changed to 4.590" and the stroke was changed to 4.680". This changes  the crankshaft part number. Engines below serial number 1194038 used crankshaft number 1830596C91. Engines above serial 1194039 use crankshaft number 1830597C91.

1995-1999 Torque Specs
Connecting Rod Torque: 115 FT/LBS
Main Bearing Torque: 160 FT/LBS
Cylinder Head Torque: Years 1997-1998 1/2 (110, 115, 165 FT/LBS) / Years 1998 1/2-1999 (100 FT/LBS, 130 FT/LBS, 130 FT/LBS, +90 Degrees) Use engine oil (15W40) on threads and washers. Bolts and holes should be clean and dry before installation. (Sequence Below)
Intake Manifold Torque: 20 FT/LBS
Exhaust Manifold Torque: 57 FT/LBS
Intake Valve Lash: .025" Hot and Cold
Exhaust Valve Lash: .025 Hot and Cold

2000-2004 Torque Specs
Connecting Rod Torque: 115 FT/LBS or 120 FT/LBS for fractured split rods
Main Bearing Torque: Using 10W40 on bolt threads 100 FT/LBS, 130 FT/LBS, + 90 Degrees
Cylinder Head Torque: 100 FT/LBS, 130 FT/LBS, 130 FT/LBS, +90 Degrees) Use engine oil (15W40) on threads and washers. Bolts and holes should be clean and dry before installation. (Sequence Below)
Intake Manifold Torque: 20 FT/LBS
Exhaust Manifold Torque: 57 FT/LBS
Intake Valve Lash: .025" Hot and Cold
Exhaust Valve Lash: .025" Hot and Cold

2005-2006 Torque Specs
Connecting Rod Torque: 120 FT/LBS
Main Bearing Torque: 100 FT/LBS, 135 FT/LBS, + 90 Degrees
Cylinder Head Torque: 110 FT/LBS, 150 FT/LBS, 150 FT/LBS, + 90 Degrees
Intake Manifold Torque: 30 FT/LBS
Exhaust Manifold Torque: 20 FT/LBS, 40 FT/LBS, 80 FT/LBS (#4 Bolt to 85 FT/LBS)
Intake Valve Lash: .019" Cold
Exhaust Valve Lash: .019" Cold

Cylinder Head Torque Sequence - 1995-1998 (Engines 1998.5-2004 Use above torque values. Follow same pattern)






The DT466E was introduced in May of 1995. The engine uses an electro-hydraulic (HEUI) fuel system. This injection system allows for unaided cold starts down to 10 degrees Fahrenheit.





*Agkits.com cannot be held responsible for the accuracy of this data.

Related Products

International DT466E Crankshaft
Your Price: $1,864.50
International DT466E Crankshaft
This crank will not work for engines 2000-2009. The 2000 & up DT466E engines changed the bore size to 4.590" and shortened the stroke to 4.680". You will need to use Part Number 1830597C91 (Currently only available through Navistar.)
International Navistar DT466E High Pressure Fuel Rail Orings
Your Price: $44.43
International Navistar DT466E High Pressure Fuel Rail Orings
Interchanges: 1842626C95
International Navistar DT466E Injector Orings (HEUI 2004-2007)
Your Price: $5.86
International Navistar DT466E Injector Orings (HEUI 2004-2007)
Interchanges: 1842624C92
Case-International/Navistar 4.300
International Navistar DT466E, NGD, I530 Connecting Rod Bearings CB1659P
Your Price: $25.19
International Navistar DT466E, NGD, I530 Connecting Rod Bearings CB1659P
1.4400" Width - Replaces: 1822389C91
Case-International/Navistar 4.300
International Navistar DT466E, NGD, I530 Connecting Rod Bearings CB1847P
Your Price: $16.53
International Navistar DT466E, NGD, I530 Connecting Rod Bearings CB1847P
1.5800" Width - Replaces: 1836020C91
International Navistar DT466E Late, DT530E Connecting Rod (Reman)
Your Price: $134.85
International Navistar DT466E Late, DT530E Connecting Rod (Reman)
DT466E & DT530E from engine s/n 1,194,038 to 2,000,000
unavailable
Navistar DT466P, DT466E, I530 Liner O-Rings (1822322)
Your Price: $11.19
Navistar DT466P, DT466E, I530 Liner O-Rings (1822322)
Sleeve orings for Navistar DT466P engines